Basic Info.
Product Description
Amorphous/microcrystalline silicon thin film laminated PV modules
Technology content, a product introduction: Amorphous/microcrystalline silicon thin film solar cell module laminated using world first-class production equipment and manufacturing process, the average stable conversion efficiency reached 9.5%. This series product size of 1.1 m * 1.3 m, this series products due to the white PVB encapsulate, if the card was on the back way when installed, can use without transformer inverter, and improve the system conversion efficiency and reduce the cost of BOS. Second, the technical principle a. Use before and after LPCVD deposition TCO electrode; B. Using PECVD sedimentary amorphous/microcrystalline silicon layer; C. Three times delimit laser carving technology, the whole area is divided into several small son battery cells in series, ensure the output power and the actual application. D. Through the layer pressure technology, before and after the panel of glass, use PVB film as the packaging materials, packaging together before and after the panel. Three, product performance characteristics 1. The cost advantage: Silicon thin film cells, only crystalline silicon 1% thickness, can save a lot of raw materials, and greatly reduce the production cost. 2. Annual generation advantage: High temperature silicon thin film components (temperature coefficient, lower than the crystalline silicon less affected by the temperature change), low light environment (weak light effect, good day longer power generation in the performance of the work is stronger than crystalline silicon components, so compared with crystalline silicon components, silicon thin film every tile with an annual capacity of the component has absolute advantage. 3. Shadow effect good: Silica films by shadow affect battery components less, and the installation Angle when compared to the crystalline silicon is more flexible. 4. Energy return cycle advantage: Thin film solar cell manufacturing process, no high temperature process. Silicon thin film of the components can be recovered only 1.6 years energy, crystalline silicon components of the energy return cycle will need to 2.2 years. 5. Higher conversion efficiency: When compared to the amorphous silicon single "products, amorphous/microcrystalline this laminated structure is more wide spectrum response (amorphous silicon single" battery spectrum absorption scope for 380 nm to 780 nm around, the amorphous/microcrystalline laminated battery photovoltaic absorption scope for 380 nm to 1100 nm or so), so amorphous/microcrystalline laminated battery is better conversion efficiency and higher performance stability. Recommend reason solar energy as the clean and renewable energy, in recent years caused the people's attention, amorphous/microcrystalline silicon thin film solar battery products as the second generation solar energy product, and has high conversion efficiency and lower cost, because this is very suitable for photovoltaic power station. Applicable scope is suitable for large-scale photovoltaic power station, roof power station and building integrated photovoltaic project.
Amorphous silicon thin film solar cells in the glass float glass for glass, after cutting, grinding side, drilling and processing technology from the.
Amorphous silicon thin film solar cells backplane glass features:
. 1100 * 1300 * 3.2 mm, 1100 * 1400 * 3.2 mm, drilling, grinding side of the glass with a special processing technology, the greatest degree reduce glass edge defects.
Address:
310# Yungu Road Gushan Town, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration
Company Introduction:
JiangYin MingYang Glass Production Co., Ltd., was established in 2005, is a large-scale professional production of silver mirror glass, silk screen glass, tempered glass, toughened glass, curved tempered glass, special-shaped steel curved glass, laminated glass, hollow glass, embossed glass, sandblasting glass, edge-grinded glass, art glass, marine glass, automotive glass industrial glass, it imported five zero five sets of glass deep-processing equipment: The United States, Italy, Switzerland, Japan and South Korea. With an annual output of 6000000 square meters of glass processing. Products have passed CCC, CE, EN-12150, CSi, with excellent quality and good control system, the products have been exported to the United States, Australia, New Zealand, Holland, the UK, Norway, Germany, Japan, South Africa, Singapore. Class service, first-class quality, customer satisfaction is our always pursuit of the goal, sincerely welcome new and old customers call us.
